Adjustment Program absorbent reset without keys and unnecessary manipulations, for EPSON printer: - XP-15000
The product can be used repeatedly!!! Detailed instructions for the discharge of the absorbent are attached.

Features of the Epson XP-15000 Adjustment Program :

You can clean the eyeliner ink.
Remove the ink from the eyeliner completely, or the symptom indicators will flash alternately.
Reset the ink flow not completely
Reduce print blurriness and color distortion
Printhead cleaning function, Power cleaning
Check if the printer is defective
You can adjust the printer settings.
You can fix printer errors.
It can be optimized for printing.
Change the print quality for the better.
Increase your typing speed.
Fixed a printer error, such as the ink fill notification indicator
Optimization during printing, for example, individual settings to save ink
And more other functions were needed.
It works with the following models :

Epson XP-15000
Note: The printer versions for this maintenance unit separately with an IC chip that can be reset using a reset chip are only available in hardware, no software can reset the chip box maintenance unit in this version.
This application does not have a function, clear the counter maintenance check box
❌ Maintenance box counter
✅ Roller lining counter

Instructions for resetting the "diaper" using the Adjustment Program Reset Epson L series reset the diaper, ink counter

Attention!!! Because the program is a service program, we temporarily disable the Defender and Antivirus before using it!

1. Run the program by double-clicking on the file Adjprog.exe

2. After opening, in the program window that appears, click the Select button

3.In the Model Name field, select your printer model.

4.Also, be sure to select the port to which your printer is connected (for example, Auto selection). Click OK and return to the previous window.

5.Enter the service mode by clicking on the PARTIAL ADJUSTMENT MODE button

6.Find the Waste ink pad counter item and click on it with the mouse twice


7. Click the Check button to see which counter is how full, and which counter needs to be reset

8. In our case, the Main pad counter is full, to reset it, put a check mark next to it and click the Initialize button, we will reset both counters. Please pay attention to this point: if there are unpublished tasks in the print queue, then the program may hang, so do not forget to clear the print queue, in some cases, it is worth restarting the computer

9. In the next window, a notification will appear "After clicking on the OK button, the counters will be reset", so click the OK button

10.Next, you will see a notification about the need to turn off the printer with the On button.\Off. therefore, turn off the printer and turn it on again:

11.After turning on your printer, the error is "Maintenance required. Contact the service center." will not appear, the "Drop" and "Paper" indicators will stop flashing, and you will be able to continue your work, all this provided that you clearly followed the recommendations in this entry. Have a nice typing!