Nand firmware without soldering Antminer L3 +, D3, A3
📂 Firmware
👤 MasterDump
Product Description
Needed: NEEDLE, SD-card 16-2 GB.
If the L3 + board does not fully start, all 4 blue LEDs do not light up (of course, if the internal nand stick is not dead at all).
If the board does not boot or sew with a factory restore L3 + SD-card from Bitmain. We read the exact instructions after the purchase.
In case of failure, no claims will be accepted, go for it at your own peril and risk.
If the L3 + board does not fully start, all 4 blue LEDs do not light up (of course, if the internal nand stick is not dead at all).
If the board does not boot or sew with a factory restore L3 + SD-card from Bitmain. We read the exact instructions after the purchase.
In case of failure, no claims will be accepted, go for it at your own peril and risk.
No Reviews Yet
Be the first to leave a review for this product!
Related Products
Firmware Samson Meteor Mic Condenser Microphone
Seller: Zasnimator
Epson Counter Reset : L500_L510_L520_L540_L550
Seller: JKShop
Full dump V1.0_171130 for Avalon 841 control board
Seller: MasterDump
MAZDA 3 2.0AT 150ЛС SW-LF8TEB000 TUN+E2
Seller: Chipmaster
Mazda 3 1.6 AT Z634EC0WZ01 Z634EC000 Stage1 E2
Seller: Chipmaster
Ford Transit 2.2 SID208 EK31-14C204-AJL TUN EGR+DPFoff
Seller: Chipmaster
Ford_Transit_22TDCI_SID208_EK31-14C204-AJN_FRQ61C800000
Seller: Chipmaster
Ford Kuga 2 2.5л Ems24xx HV4A-14C204-BBA e2+tun
Seller: Chipmaster